PRACTICAL ADVICE FROM YOUR LOCAL IT TECHNICIAN
Wi-Fi works near the router but not in other rooms: what to check
If a video call works in the lounge but breaks up in the study, start by comparing the two locations. A faster internet plan may not solve a coverage problem inside the house. I recommend finding where the connection changes before buying more equipment.
Separate the internet connection from Wi-Fi coverage
Your internet service brings a connection to your premises. Wi-Fi is the wireless link between your device and the router or another access point. A problem with either part can make a website feel slow, but the fixes can be quite different.
Strong Wi-Fi bars do not measure the speed of your internet service. Equally, an internet plan with plenty of speed cannot remove a thick wall between your laptop and the router. The useful question is whether the trouble follows a room, one device, or the whole household.
Make a simple room-by-room comparison
Use one phone or laptop for the first comparison so you are not also comparing different equipment. Check that it stays on your home Wi-Fi rather than switching to mobile data. Keep the same speed-test service and test conditions where possible.
- Pause optional large downloads and streaming while you test.
- Run a test near the router and note the result and time.
- Repeat in the room where the problem happens.
- Return near the router and test again to check the pattern.
Also try your usual activity, such as loading a website or making a call. A speed-test number is one observation, not a complete diagnosis. If practical, compare a second device in the problem room. When only one device struggles, its own connection or software deserves attention.
If you have a suitable computer and Ethernet cable, a test through a router LAN port can help separate wireless performance from the rest of the connection. Keep the cable out of walkways, and do not move the cable that supplies the router's internet connection.
Look at where the router is sitting
Check whether it is tucked behind a television, inside a cupboard or at the far end of the house. Try an open, uncluttered position closer to where Wi-Fi is needed, within reach of its existing connections. Keep ventilation clear and avoid stretching cables.
Walls, floors, metal furniture and other obstacles can weaken the signal. Change one thing, then repeat your test in the same room. A small move that gives the signal a clearer path is worth testing before a purchase. Do not move fixed connection equipment or alter house cabling to experiment.
Notice busy times and temporary faults
Several streams, downloads or cloud backups running together can share the available capacity. If performance changes with household activity, note what was happening rather than assuming the provider is at fault. Resume paused backups afterwards.
A normal router restart can sometimes clear a temporary problem. Arrange a suitable time, save work and follow the manufacturer's restart instructions. Everyone using the connection will be interrupted. Avoid the recessed reset button: a factory reset may erase the setup. Retest once the equipment has fully reconnected.
Consider extra coverage only after testing
A mesh system or an additional access point may help when the layout leaves rooms poorly covered. Placement still matters. A wireless mesh point needs a usable connection back to the router or another point; putting it in the worst dead spot can simply move the bottleneck.
Follow the equipment's placement guide and use its connection test if available. Start between the working area and the poorly covered room, then adjust based on results. For a fixed desk, a properly installed wired connection may be another option. The right arrangement depends on the building and the equipment already there.
Keep a few useful notes
Record the affected rooms, devices, times and test results, plus the router model and any recent changes. If performance is consistently poor even close to the router or over Ethernet, the cause may extend beyond Wi-Fi coverage. Check your provider's service information and share the results when asking for help. That gives the next person something concrete to investigate.
LOCAL HELP. A REAL PERSON.
Need a hand? I’ll come to you.
Friendly on-site support for homes and small businesses across the Gold Coast.
$200 including GST covers the call-out and up to two hours of on-site support. Any additional time, parts or software costs are discussed and agreed before proceeding.
Same or next day appointments, subject to availability. All major credit cards accepted.